Disinfection of Irrigation Water Using Titanium Electrodes

by Qing, G.; Abolhassani, M.; Daneshpour, R.; Foster, S. L.; Matlock, M.; Thoma, G.; Greenlee, L. F.

This work reports on the electrochemical disinfection of natural irrigation water collected from the Waiahole Ditch Irrigation System in Hawaii using a batch cell assembled with titanium electrodes as both anode and cathode. Disinfection experiments were performed by applying a polarity-reversing direct current between the two titanium electrodes. The naturally occurring concentration of chloride in the water was 1.84 mg l(-1) and no other chemicals were added. The applied current density was varied between 0 mA cm(-2) and 2 mA cm(-2), and the half-period (T/2) of the polarity-reversing direct current was varied between 5 s and 60 s. The best disinfection performance was achieved at 2 mA cm(-2) and T/2 = 10 s, requiring only 5 min of treatment for the complete disinfection of E. coli (4-log reduction). E. coli was inactivated by free chlorine species electrogenerated at the titanium electrodes. Hydrogen peroxide, short-lived oxidants, and direct electron transfer most likely had minor contributions to the disinfection process. During the disinfection experiments, the concentrations of disinfection byproducts (ClO3 (-), CHCl3, CHBrCl2, CHBr2Cl, and CHBr3) were significantly lower than recommendations for drinking water. The titanium electrodes consumed less electrical energy than platinum-coated titanium electrodes because they needed a lower current density to achieve similar disinfection efficiency.

Journal
Journal of the Electrochemical Society
Volume
168
Issue
6
Year
2021
URL
https://dx.doi.org/10.1149/1945-7111/ac0943
ISBN/ISSN
1945-7111; 0013-4651
DOI
10.1149/1945-7111/ac0943