Electrochemical Characterization of Poly(3,4-ethylenedioxythiophene) (PEDOT)-Modified Electrodes in Acetonitrile/Water/Trifluoroacetic Acid Solutions and Application in Magnetohydrodynamics Microfluidics
by Lynch, M. L.; Fritsch, I.
Electrochemical characterization of electropolymerized poly(3,4-ethylenedioxythiophene) (PEDOT)-modified gold band electrodes on a chip was performed in water/acetonitrile mixtures (0-90% (v/v) CHs3CN) containing 0.1% (v/v) trifluoroacetic acid (TFA) as the electrolyte. The performance of applied-current redox magnetohydrodynamic (R-MHD) microfluidics at a coplanar arrangement of parallel PEDOT-modified pumping electrodes in a confined chamber on a 0.37 T NdFeB magnet was also established under these conditions, at applied currents of 25-100 mu A, extending R-MHD operation to mixed solvent environments beyond purely aqueous ones. Chronopotentiometry (CP), chronoamperometry (CA), and cyclic voltammetry (CV) were performed across three electrode configurations, with responses described by a serial RC circuit model. PEDOT capacitance is relatively invariant across the full composition range: 32 +/- 2, 33.0 +/- 0.4, and 28 +/- 2 mF cm-2 for the 3-electrode semi-infinite, 2-electrode semi-infinite, and 2-electrode confined configurations, respectively. Electrochemically-measured PEDOT resistance scales approximately proportionally with solution resistivity (inverse conductivity) as %CH3CN increases, attributed to declining ionic mobility rather than polymer-solvent interactions, and for fixed cutoff potentials, restricts the maximum achievable current and R-MHD pumping duration. Velocity profile shapes in the R-MHD chamber were consistent across solution compositions, with velocity magnitudes scaling linearly with 1/(dynamic viscosity, mu) and applied current (24-39 mu m s-1 at 25 mu A and 95-170 mu m s-1 at 100 mu A for 0-80% CH3CN). A wide rectangular channel model incorporating a hydraulic resistance scaling factor fg accurately predicts velocities from independently measurable quantities. Fluid displacement tracks 1/mu across most of the composition range, as decreasing viscosity offsets increasing PEDOT resistance with increasing %CH3CN. Above 70% CH3CN, displacement continues to increase at 25 mu A but decreases at higher currents where iR drop dominates. These studies address previously unexplored solution compositions directly relevant to mobile phase selection in reversed-phase chromatographic applications.
- Journal
- ACS Electrochemistry
- Volume
- 2
- Issue
- 11
- Year
- 2026
- Start Page
- 2731-2749
- URL
- https://dx.doi.org/10.1021/acselectrochem.6c00308
- ISBN/ISSN
- 2997-0571
- DOI
- 10.1021/acselectrochem.6c00308