Characterising Asphalt emulsion: a study of thermal and chemical properties via Thermogravimetric Analysis (TGA) and Fourier Transform Infrared (FTIR) spectroscopy

by Roy, A.; Chen, J. Y.; Braham, A.; Casillas, S.

Asphalt emulsion, widely used in Cold Mix Asphalt (CMA) and surface treatments, offers environmental benefits due to its ambient temperature application. This study investigated the thermal and chemical behaviour of two asphalt binders (PG 64-22 and PG 64-10), two emulsifiers (CMS and CQS), four asphalt emulsions, and their residues. PG 64-22 (containing 12.6% asphaltene) was classified as a sol-gel binder, exhibiting elasticity, whereas PG 64-10 (with 6% asphaltene) demonstrated high-temperature sensitivity. TGA categorised asphalt binder, asphalt emulsion, and emulsion residue into six regions. The results revealed that soap solution increased mass loss at 13-360 degrees C by 1.81-9.12%, indicating breakdown of high-molecular-weight resins and asphaltenes into smaller molecular fragments. Although FTIR analysis showed no significant chemical changes, it revealed elevated aliphatic (C-H) group intensity - peak ratios increased from 0.087 in binder to 0.092 in emulsion, indicating enhanced flexibility and reduced viscosity, particularly in CQS emulsions. Pyrolysis behaviour showed PG 64-22 had similar to 12% higher activation energy (63.9 kJ/mol) than PG 64-10 (56.9 kJ/mol). However, emulsification reduced activation energies by 84-89%, highlighting significant thermal destabilisation due to emulsifier interaction. These findings underscore the effectiveness of FTIR and TGA in characterising asphalt emulsions, providing valuable insights for optimising their formulation and performance in pavement applications.

Journal
International Journal of Pavement Engineering
Volume
26
Issue
1
Year
2025
URL
https://dx.doi.org/10.1080/10298436.2025.2538778
ISBN/ISSN
1029-8436
DOI
10.1080/10298436.2025.2538778